7155 Opal Rd, Warrenton, VA 20186
Mon-Sun: 6:00 AM - 9:00 PM
Office: Mon-Sun 6:00 AM - 9:00 PM · 24/7 Emergency Heating & Cooling 540-222-2737

Furnace Inspection in Warrenton, VA

Updated

A furnace that hasn’t been checked can fail on the coldest night of the year, and some problems, like a cracked heat exchanger or a blocked vent, can put carbon monoxide in your home without any warning sign. A furnace inspection from Elite Air finds those problems before winter does, so your family stays warm and safe.

Our NATE-certified technicians inspect natural gas and propane furnaces in Warrenton, across Fauquier County, and throughout Northern Virginia. Heat out right now? We offer 24/7 emergency heating service.

Why Get a Furnace Inspection?

Safety firstChecks for carbon monoxide and venting problems
Fewer surprisesCatch worn parts before the first freeze
Plain answersWe show you what we found and explain it
24/7 emergency helpIf your heat goes out, call any time

Furnace Inspection Near Warrenton, VA: Quick Answers

Updated

New Trane gas furnace installed by Elite Air in a Prince William County, VA basement
A new Trane gas furnace Elite Air installed in a Prince William County basement. See the full project.

Where can I get a furnace inspection near Warrenton, VA?

Elite Air is a family-owned heating and cooling company based at 7155 Opal Rd in Warrenton, locally operated since 2012. Our NATE-certified technicians inspect furnaces in homes across Fauquier County and nearby counties. Call 540-222-2737 to book a visit.

What does a furnace inspection check?

It is a safety check first. The technician looks at the parts that keep fire and fumes where they belong, checks for carbon monoxide, makes sure the furnace lights and burns the right way, and confirms exhaust leaves your home. Then they check the filter, airflow, and thermostat so the heat actually reaches your rooms.

How long does a furnace inspection take?

A typical visit takes roughly an hour. Your technician watches the furnace run through a heating cycle and checks each safety part before they leave.

When should I get my furnace inspected?

Fall is best, before you rely on the heat every day. If you missed fall, it is still worth doing now. Book sooner if you notice a burning smell, higher electric or utility bills, new noises, or heat that seems weaker than last winter.

Is a heater inspection the same as a tune-up?

They overlap. An inspection focuses on finding safety and performance problems. A heating tune-up adds cleaning and adjustment. Our maintenance plan includes a fall heating visit every year.

What if the inspection finds a problem?

Your technician shows you what they found and explains it in plain language, then gives you your options. If something is unsafe, they will tell you right away. You decide what happens next.

What if my furnace stops working at night or on a weekend?

Elite Air offers 24/7 emergency heating service. Call 540-222-2737 any time.

What a Furnace Inspection Checks

We start with the parts that protect your family, then make sure the heat gets where it needs to go.

Heat exchanger

The wall between the flame and the air you breathe. We look for cracks or damage that could let fumes into your home.

Carbon monoxide

We check for carbon monoxide around the furnace so you know the air near it is safe.

Burners and ignition

We make sure the furnace lights reliably and the flame burns clean and steady.

Flue and venting

We confirm exhaust is leaving your home the way it should, with no blockages or leaks.

Filter and airflow

A clogged filter or blocked return makes the furnace work harder and run hotter. We check both.

Thermostat

We make sure the thermostat turns the heat on and off when it should, so your rooms reach the temperature you set.

Two furnace heat exchanger cells with visible cracks lit by a flashlight, found during an Elite Air furnace inspection
A cracked heat exchanger Elite Air found during a furnace inspection. Cracks like these can let carbon monoxide into the air you breathe, which is why we check this part carefully.
Technical details for the curious
  • Visual check of the heat exchanger and combustion area for cracks, rust, or soot.
  • Carbon monoxide reading near the furnace and around the vent connection.
  • Burner flame appearance and ignition sequence observed through a full heating cycle.
  • Flue pipe, vent connections, and draft checked for blockages, gaps, or backdrafting.
  • Safety switches and limit controls confirmed to shut the furnace down if something goes wrong.
  • Filter condition, blower, and return air path checked for restrictions.
  • Thermostat call for heat and shut-off confirmed.

Signs Your Furnace Needs an Inspection

If any of these sound familiar, call us before the next cold snap.

  • Your furnace hasn’t been checked since last winter, or you don’t know when it was.
  • You smell something unusual, like a burning smell or a gas-like odor, when the heat runs. If you smell gas, leave the house and call your gas company first.
  • Your electric or utility bills jumped without a clear reason, even when the weather hasn’t changed much.
  • Your carbon monoxide alarm has gone off, or you feel headaches or dizziness that ease when you leave home.
  • The heat runs but some rooms stay cold, or the furnace turns on and off a lot.
  • You hear new banging, rattling, or squealing from the furnace.
  • You just bought the home and want to know what condition the heating system is in.

How long does it take? A typical furnace inspection takes roughly an hour. Most of that time is spent watching your furnace run and checking each safety part.

Call 540-222-2737

Inspected Every Fall, Without Having to Remember

Our HVAC maintenance plan includes a heating visit every fall and a cooling visit every spring, plus priority scheduling when the weather turns.

Recent Elite Air Projects

Furnace Inspections Across Northern Virginia

From our Warrenton shop we inspect furnaces in homes across six counties. Don’t see your town? Call and ask.